 |
|
|
|
|
FPV---First Person View system |
| Date Added: September 19, 2008 03:09:53 AM |
| Author: Hu Jihui |
| Category: 19. Other RC Website Links |
| The following are some details about it.*includes: ① Head Movement Tracking System ② small camera ③ATX10 2.4G audio-visual transmitter ④ARX 2.4G audio-visual receiver ⑤7.4V800mAh lipoly for receiver ⑥11.1V800mAh lipoly for transmitter ⑦pan/tilt（including two 9g servoes） ⑧2-3S lipoly charger *Head Movement Tracking System(for example,X-GYRO1000): X-GYRO 1000 is a kind of two axis head movement tracking system, based on high technology of sensor technique, designed for tracking complicated three-dimensional motion like head movement and so on, it can also be used on the areas of controlling drones and robots, transferring three-dimensional motion signals from hands, head of human to corresponding movement system on RC model, drone or robot. The basic version of X-GYRO 1000 is specially designed for RC models with FPV (First Personal Version), it can be used perfectly with main stream transmitters that gets self defining trainer channel on market or to be co-operated with wireless high frequency modular independently. It can transfer the checked movement signals to transmitter, and the transmitter can send out signals of head movement or position of head (on two axis), so that the real synchronization can be realized when screen on the goggles displayed video pictures, users can look around as if he were inside the RC model. Since it is compatible with transmitters on nowadays market, it is easy and simple to use it and grasp it， its best advantage is that no need any fixed reference object to check and measure the inflection position of RC model, and no drift at all when it in stationary state compared with other facilities that need to make use of very complicated reference facilities or manual controlled transmitter, mechanical arms or other tools are heavy and not easy to be carried along, it greatly limited users’ freedom.X-GYRO is compatible with high end FUTABA transmitters (FF-7, FF-8, FF-9, T9Z, T12MZ, T14MZ) supporting trainer/student function by using 6 pins square trainer connector. These transmitters can supply power for X-GYRO, no need external power. It can generate same standard PPM signal and merge selective pan/tilt signal channel into PPM, and then send it to model (default: channel 7 and channel 8 respectively, user can also define the channels for themselves), the system can send standard PPM signal to those unused channels, X-GYRO1000 can support those transmitters which can let users make choice on channels controlled by student (except of 1-4 channel) and controlled by trainer when mistake happens.Since the FUTABA transmitters（especially the FF9/9C series），trainer switch is momentary switch, only if you leave it always “on” can realize its function. The simplest way for it is to hold the switch on with a rubber band. Other high-end transmitters such as (T9Z, T14MZ) have already put the trainer channel to always “on” channel. Please feel free to contact me for more details Thank you, Hu Jihui From AEO |
Article Details
