BAE Hawk EDF kit
WingSpan: 960mm
Length: 1030mm
Weight: 350g

This kit is a full kit, complete with the following.
2200mah 11.1v Lipo
Brushless Outrunner & EDF
40A Brushless Speed Controller
Foam Glue
Accessories
Landing gear & steerable nose wheel.

This is a beautifully painted and detailed kit. Its no wonder the BAE Hawk has a cult following and very popular amoung EDF enthusiests!

The wing comes lightened and includes balsa inserts for the aileron servos.
It will take you around 3-4hrs to finish this model.

Required.

Servos (Aileron, elevator, rudder) 9-20g sized
Receiver
Wiring accessories, such as shrink tube, connectors and 12AWG silicon wire.
5min or 15min Epoxy Glue.

Building tips.
Fan is built into the kit, so be sure to test the power system prior to installation. We recomend epoxy glue for a faster build. Included glue can take up to 1day to dry completely.

*Plane will fly well if run with a 5S or 6S pack. A 3S pack will not power the EDf sufficiently.
EDF fan has been replaced with a larger and more robust unit.