HobbyKing/HobbyCity FlyCat Complete Kit w/ Motor/EDF/BESC

FlyCat EDF kit
This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!
The flycat comes complete with a 1500mah 3S1P lipoly pack, 25A ESC and 4800kv inrunner & EDF.
This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A
Motor: 4800kv 20-30 size Inrunner
Lipoly: 1300mAh 11.1v 20C

Required.
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
Your own receiver and transmitter

EDF was mounted on the stink mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.
Overall an excellent plane which flys smoothly, even on windy days.
We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

Images of completed model here;
http://myhobbycity.com/gallery/showimage.php?i=85&catid=newimages

This is a fantastic model, and great fun to fly.
You can read all about its building and flying on the link below.
http://www.rcgroups.com/forums/showthread.php?t=548966

YouTUBE Video of This FlyCat EDF Kit Can Be Found Here:
http://www.youtube.com/watch?v=HE8nODoLJYQ&e