ESKY Professional Radio Control Helicopter Head Lock Gyro Model # EK2-0704B

Specification:

* Input signal:1.5�0.5ms
* Input power: 5~6VDC
* Weight: 12.5g
* Size: 27 x 28.5 x 18mm

Feature Illumination:

* Can be used on Engine and Electric Helicopters
* Dual sensibility adjusting - nose locked model and standard model;
* Suitable for 4ch and 6ch transmitter;
* With a built-in temperature equalizing electro circuit;
* To both 6CH and 4CH transmitters, the gain value can be adjusted through crust

Installation:
* The EK2-0704B headlock gyro must be installed horizontally (LED faces upward)
* The headlock gyro (3pins) cable should connect to the channel 4 on the receiver.
* The tail servo should connect to the headlock gyro.

* You can choose not to connect the single orange cable to channel 5 on the receiver. if the gain of the headlock gyro > 50, it is in the head locking mode. If gain < 50, it will be in the normal mode.
* Please tie up all the cables before fly, this is to prevent loose cables to touch the main gear or motor.