Related Videos

Trex 450 v2 shake problem (need a solution)
Why that shake? I double checked everything! Also to prevent tail rotation from the main blade torque, I had to trim the rudder stick to 50% to the right. "By the way, I am new to RC helicopter" Heres what I've all ready check - Belt is tight - Blade tracking has been done - All screws are tight with "lock tight" liquid - Servos are all 90 degres That is what I use: - 3 servos Hitec HS65MG - Tail servo is an Align DS420 - Gyro Futaba GY520 - Spektrum DX6i remote These are my gyro setting and I've try them all (except analog parameter) - 1. Digital 1520us servo - 2. Normal (check) - 3. Servo limit (check) - 4. Flight Mode on 3D Mode (F3C Mode gives me tail wag) - 5. Response is on Standard These are my TX setting: - Travel Adjust: Gyro 100% - Sub trim: Gyro is at 0 - Gyro switch 0: at 65.0% - switch 1: at 30.0% Throttle curve is 0-25-50-75-100 Pitch curve is 20-35-50-75-100 NO Revo Mix has been done Please help me Thank you